The 7″ WaterProof Monitor has two options to choose from the 2 Channel model or the 4 Channel model, at an affordable cost and still loaded with lots of features.
Features:
- 7″ Digital Color LCD TFT Monitor
- 2 Channel Model or 4 Channel Model with Quad Switcher
- Sealed Aluminum Alloy Case with Steel bracket and plastic visor
- Dustproof
- Waterproof
- Explosion Proof
- Uses 200mA of 12V DC power
- Hydrochloric Acid Resistant
- IP69K Rated (better than IP68 – can handle high-pressure heated wash-down water and chemicals)
- Each channel can be switched from normal to “Reverse” images.
- Front Panel Controls and Wireless Remote Control included
- Trigger Wires included call-up of any channel automatically (by switch or connect to back-up, blinkers, etc.) Can set delay time for camera call-up as well.
- Standby mode can also power up only when triggered.
- 2 Channel Model: single-channel selectable (2 BNC Inputs)
- 4 Channel Model: single, dual, triple & quad images selectable (4 BNC Inputs)
- The menu can be changed from English to Dutch, Spanish, Portuguese, French, German, Italian, and Russian.
- Wide Voltage Range: 12-32 Volts DC
- Wide Temperature Range: -22°F to 175°F (-30°C to 80°C)
- Wide Viewing Angles: Up: 50° Down 60° Side to Side: 70°
- 16:9 Aspect Ratio
For more information on the 7″ WaterProof Monitors, contact one of our Design Engineers toll-free 866-301-2288 or stop by our website at ruggedcams.com.
