A New Addition to the N-SPEX Vehicle Inspection System family of vehicle condition Inspection & Documentation Systems.
View & Document the front, back, sides and top of all Trucks, Trailers, Rail Cars, etc. Truck / Trailer / Cargo / Container / Rail Car Inspection Condition & Documentation System N-SPEX TRUX STIX
- 8 Hi-Resolution HD-TVI Cameras 1080p
- Each cameras zoom function can be controlled through the DVR
- Standard Height is 13’ 6” (custom heights and # of cameras available)
- White powder coated aluminum (custom powder coat colors available)
Available Striping:
Red/White
Black/Yellow
N-SPEX Cameras are so small as to go unnoticed, yet are rugged and completely vandal-proof. Sealed, watertight housings are weatherproof and high-pressure wash-down resistant (NEMA IP-66 rated). These High-Resolution cameras are made from rugged metal and feature a thick Lexan viewing dome with adjustable camera angle depending on how far away from the entrance you wish to start seeing the vehicle.
These High-Resolution cameras are pre-adjusted and pre-focused to provide the perfect solution to the viewing angles and distances you need to adequately document the condition of vehicles entering and leaving your facility. This makes installation a snap!
The N-SPEX TRUX STIX will give you a view of:
Left Side STIX: Left Top of Vehicle, left Side Upper, left Side lower, Front of Vehicle & License Plate
Right Side STIX: Right Top of Vehicle, Right Side Upper, Right Side lower, Rear of Vehicle & License Plate
N-SPEX STIX HD-TVI – Specifications
Dimensions | 13′ 6″ Tall x 6″(inch) Square |
Surface Attachment | 4 – 3/8″ x 3″ Concrete Anchors (included) |
Cameras
Image sensor | 1/2.9″ Sony CMOS (XM-222) |
Effective pixels | 1944(H) x 1092(V) |
H. Resolution | 1080p |
Synchronization system | Internal |
Scanning system | Progressive |
Video output | TVI / 1.0Vp-p Composite 75 Ohms |
S/N ratio | More than 52dB (AGC Off) |
Min. Illumination | 0.1Lux |
Shutter Speed | Auto (1/30sec – 1/60,000sec) |
Gamma Correction | Standard y = 0.45 |
White Balance | 1,800 °K ~ 10,500 °k Auto |
Gain Control | Standard : -6dB ~ 44.8dB Auto |
Smear Effect | 0.005 |
Power source | 12v DC |
Power source | 110mA |
Lens | 4mm |
MTBF | 80,000 Hours |
Iris Control | Electronic |
Operating temp./Humidity | 14°F~ 120°F (Humidity : 0 RH ~ 90 RH) |
IP Rating | 66 |
Dimensions | 3.10 Diameter x 2.25 Length |
Installation Recommendations
- – For best vehicle coverage, it is recommended that each poles be installed to where the vehicles will pass by at least 42 inches from the poles.
- – For best image quality, it is recommended that the poles not be installed in direct sunlight or in a location where they will be constantly wet.